Melting Point Apparatus

Product Details:

Supplied with 250ml Beaker, Teflon Assembly for holding capillary, Heater, RTD Sensor, Silicon Oil, Melting Capillary one end sealed (Pack of 100 Nos), Boiling Tube, Teflon Coated Magnetic Paddle, Power Cord , Operational & Instruction Manual and Warranty Card.

• Backlit LCD Display : 16 x 2 Line Alphanumeric
• Temperature Range : +5ºC above ambient to 300ºC
• Temperature Sensor : PT100
• Readability : 1.0ºC for Model ThermoCal
• Readability : 0.1ºC for Model μThermoCal10
• Temperature Accuracy : ± 1ºC , +10ºC above ambient to 300ºC
• Power Supply : 230 VAC ± 10% , 50 Hz

• Built in Magnetic Stirrer with soft touch Key Speed Controller with audio sound.
• Simultaneous Display of Melting Range as MP1 & MP2.
• Automatic Temperature Heating depending upon heating requirement.
• Electronic Temperature Regulator to increase / decrease heating rate.
• Facility to enter set temperature by using soft touch keypad.
• Soft Touch Keypad to prevent contact problem.
• Over heating protection by heating cut-off.
• On-site Temperature Calibration by Calibrated Thermometer.
• Re-Call Default factory set calibrated temperature data.

Product Details:

• Detection Principal : Automatic by photocell
• Temperature Range : 5ºC Above Ambient to 400ºC
• Heating Rates : 0.1 to 10.0ºC/min (Increment of 0.1ºC)
• Detection of Melting :
  a) Melting Point
  b) Melting Range
  c) % Level of Melting Point between Melting Range
• Oven Controller : Microcontroller Based
• Temperature Resolution : 1.0 / 0.1 ºC - Selectable
• Calibration : Multi Point Calibration Standard - as per Pharmacopia or any users known standard.
• Max. Heating Time : Less then 10 Minutes from 50ºC to 350ºC
• Max. Cooling Time : Less then 10 Minutes from 350ºC to 50ºC
• Melting Capillary : Three Capillary ( Three Channel )
• Accuracy of Temp.:
  • Ambient +10ºC to 100ºC………… ± 0.2ºC.
  • 101ºC to 200ºC …………. ± 0.4ºC.
  • 200ºto 350ºC …………….. ± 0.5ºC.
• Sample : Borosilicate Capillary Tube One End Sealed
  • OD : 1.4 to 1.6 mm
  • ID : 1.0mm
  • Length : 100mm
  • Filling Height : 3 mm
• Temperature Sensor : PT-100
• Data Storage as per GLP : Non Volatile Memory with More than 300 analysis data storage with corresponding calibration data with Batch / ID Number, Real Date & Time for Validation, Operator Name, Sample Name, searching of data as per Record Number.
• Program Storage : 20 User methods parameter with Add/Edit Facility.
• Printer Output : Parallel Port for Dot Matrix Printer Attachment
• Computer Interface : Serial Port & USB
  RS-232 to USB Interface with Cable & Driver Software to Transfer Data From Inst. to PC
• Keyboard : Alphanumeric Polyester Softkeys
• Display : 20 x 4 Line Alphanumeric Backlit LCD
• Power : 230 VAC ± 10%, 50Hz

• Camera attachment

Product Details:

Product Details:

The instrument basically consists of a Microprocessor Auto Melting Point Apparatus S-975 with Auto controlled heating rate arrangement, an air circulating arrangement and a digital temp. Indicating circuitry with necessary controls, Temperature at the melting point is latched on the digital display and the furnace is automatically cut-off. The instrument gives audio & visual indications, on reaching the temperature at which the sample melts. The temperature indicating point of the sample remains displayed on the panel till the switch is "RESET" is operated. Suitable for Melting Point, Recommended for Melting Range 350C, Readability C, Resolution 1C, Programmable, Automatic ramp Rate Proceeding, Auto Gradient Rate of Heating Control, Sample Capacity 1 Sample, With Cooling arrangement of Furnace

Product Specification

Ø Microprocessor Temp.

Ø Range Ambient to 350C & 300C

Ø Display 3 Digits, 4 Digits or 16X2 lines alphanumeric display

Ø Resolution 1C & 0.1C

Ø Ramp Rates 2C to 10C/minute (Selectable Auto-Low-High),

Product Details:

Product Details:

Digital Auto Melting Point Apparatus Up to 300C, Suitable for Melting / Boiling Point, Readability in C, Resolution 1C, Programmable, Visual provision by Optical Magnifier, Automatic Ramp Rate Proceeding, Auto Gradient Rate of Heating Control, Sample Capacity 3 samples. The unit consists of a built in magnetic stirrer, glare free background illuminator and cylindrical silicon oil bath. The silicon oil bath consists of a plain cylindrical container of corning glass having capacity of about 200 ml. It is furnished with a Teflon cover fitted with special type of oil immersion heater, having three small holes for holding the capillaries, one big hole for thermometer and another big hole for boiling point tube / Temp. Sensors for calibration purposes. A variable speed stirrer is fitted in it. The apparatus can be used for determination of boiling points, Temp. effect on viscosity /flow points and molecular weights by Rast's method with suitable accessories. 

Melting View Magnifying display of melting operation with the help of adjustable magnifying glass, Melting point reading hold on by activating the "HOLD" key & reading is protected from power failure till "RESET" is not activated. 

Product Details:

Determines melting point and melting range

Heater safety cut-off at 345 °C

Programmable rate of heating

FRP Body

Liquid bath for better accuracy

Product Details:

 MELTING/BOILING POINT APPARATUSMODEL: VMP-CM 

Specifications:

Equipped with color camera and color monitor to observe Melting Point with ease.

Validation Program for Standard samples.

8 Operator names can be stored.

Graphic LCD Display to display all test parameters & test instructions.

Memory to store around 100 test records.

Facility for testing UNKNOWN sample.

Temperature range: Room temperature +2 °C - 300 °C.

Temperature resolution: 0.1 °C.

Heating rate: 1 °C/minute (Starts from set temperature – 10 °C).

Input: Tactile Keyboard + PS - 2 keyboard.

Printer Facility: Available.

Product Details:

Product Details:

Digital Auto Melting Point Apparatus Up to 300C, Suitable for Melting / Boiling Point, Readability in C, Resolution 1C, Programmable, Visual provision by Optical Magnifier, Automatic Ramp Rate Proceeding, Auto Gradient Rate of Heating Control, Sample Capacity 3 samples. The unit consists of a built in magnetic stirrer, glare free background illuminator and cylindrical silicon oil bath. The silicon oil bath consists of a plain cylindrical container of corning glass having capacity of about 200 ml. It is furnished with a Teflon cover fitted with special type of oil immersion heater, having three small holes for holding the capillaries, one big hole for thermometer and another big hole for boiling point tube / Temp. Sensors for calibration purposes. A variable speed stirrer is fitted in it. The apparatus can be used for determination of boiling points, Temp. effect on viscosity /flow points and molecular weights by Rast's method with suitable accessories. 
- Melting View Magnifying display of melting operation with the help of adjustable magnifying glass, Melting point reading hold on by activating the "HOLD" key & reading is protected from power failure till "RESET" is not activated.